Working in digital media/web design, I have the opportunity own/barrow devices to test my work. Personally, I have such a small workspace to begin with and having unknown amount of devices to be placed flat on my desk (with my laptop, drawing tablet, papers etc…) has become an inconvenience and takes up too much room. Also, I would have to constantly look downwards causing some strain both eyes/neck. Sure I can spend a few dollars to buy an individual device stand or device cases with built-it-stands but it adds up.
The results of this DIY: not only did I end up with a travel headphone case but a travel stand too. Yes, a 2-in-1 DIY ;)
Items purchased cost less than $3 in total. Most items you can find at home.
What you'll need/Materials used:
- Metal pliers or scissors ($1-1.50)
- Headphone case box – I found this at a local Dollarama for $1
- Pencil or pen (No Markers!)
- Glasses / Protective glasses / Sunglasses (if it’s sunny) *optional
Steps
Step 1:
Hold the device close to the center of the box. If you own (or barrow) more than one device use the device with the thicker width. In this case, I’m using the Blackberry Playbook.
Trace/draw lines of the device onto the box with your pencil/pen. I refrained from using any marker as I was paranoid of getting markings on the device screen. We don’t want that!!! Make sure you have a total of 4 lines (2 for each side – front & back).
Step 2:
*You may want to put on your glasses/protective eyewear, small plastic do fly in unknown directions while cutting.*
Use the wire cutters/scissors to cut along the “inner section/side” of the drawn lines and stopping at the base. After you cut along lines, wiggle the “piece” to get it out.
Step 3:
Place your device in the stand. Ensure it’s placed equally balanced on both ends. If it seems too snug, repeat Step 3 by trimming plastic sides slowly.
Let me know if you try this out:
E-Mail | Twitter | Blog
Follow my blog with Bloglovin
If you're like me, you like to be organized. Not just organized by purchasing many boxes and storage containers but in the "cheapest" way possible. I've acquired quite a number of belts over the years (purchases, thrifting, hand-me-down). However, I disliked storing them in boxes since I wanted a solution where I didn't have to "dig" for my belts. So my option was to hang them, but this was also becoming a hassle. Especially when I went to pick a belt, I would have remove belts that were ontop it knocking a few belts along the way.
So one day I was going down the aisle of my local dollar store (Dollarama) and noticed they had placed new items. Trust me I LOVE this place. One item they had added was Shower Curtain hooks! Then an idea popped in my head - let me try hanging something else with these ;)
following items from the dollar store ;)
Optional Idea:
Take the miniscrew driver and gently press it between the casing and the eyeshadow pan - and lift up. (ref. left photo)
it on the glue from back of the eyeshadow pan (ref. right photo). Label this pan for the time being so you don't forget which shadow this is; this is helpful when you depot many in one day.
